Notes on operation
COMBI connectors are connectors without switching power in accordance with IEC 61984 and can be connected or disconnected without load or voltage when used as intended
Note
With a free-hanging connection, an insulating foil has to be placed between the plug connection and electrically conductive surfaces.
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
Cross section AWG
28 ... 10 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
28 ... 12 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
Flexible conductor cross-section (ferrule with plastic sleeve)
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Maximum load current
32 A (with 6 mm² conductor cross-section)
Flammability rating according to UL 94
Insulating material group
Short-time withstand current 4 mm²
Specification
DIN EN 50155 (VDE 0115-200):2018-05
Spectrum
Long life test category 1, class B, body mounted
Frequency
f<sub>1</sub> = 5 Hz to f<sub>2</sub> = 150 Hz
Test directions
X-, Y- and Z-axis
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
Ambient temperature (operation)
-60 °C (max. operating temperature see derating curve)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
Ambient temperature (actuation)
Permissible humidity (operation)