Notes on operation
COMBI connectors are connectors without switching power in accordance with IEC 61984 and can be connected or disconnected without load or voltage when used as intended
Note
With a free-hanging connection, an insulating foil has to be placed between the plug connection and electrically conductive surfaces.
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
Cross section AWG
28 ... 10 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
28 ... 12 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
Flexible conductor cross-section (ferrule with plastic sleeve)
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Maximum load current
32 A (with 6 mm² conductor cross-section)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
Relative insulation material temperature index (Elec., UL 746 B)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
Calorimetric heat release NFPA 130 (ASTM E 1354)
Surface flammability NFPA 130 (ASTM E 162)
Specific optical density of smoke NFPA 130 (ASTM E 662)
Smoke gas toxicity NFPA 130 (SMP 800C)
Short-time withstand current 4 mm²
Specification
DIN EN 50155 (VDE 0115-200):2018-05
Spectrum
Long life test category 1, class B, body mounted
Frequency
f<sub>1</sub> = 5 Hz to f<sub>2</sub> = 150 Hz