General
The max. load current must not be exceeded by the total current of all connected conductors.<br/>Current and voltage are determined by the plug used.
Note
The max. load current must not be exceeded by the total current of all connected conductors.
With a free-hanging connection, the user has to take care that the required distances to electrically conductive surfaces are complied with.
Maximum power dissipation for nominal condition
Number of connections per level
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
Cross section AWG
24 ... 8 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
24 ... 8 (converted acc. to IEC)
Conductor cross-section flexible ultrasound-compressed
Conductor cross-section, flexible [AWG] ultrasound-compressed
22 ... 8 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
Flexible conductor cross-section (ferrule with plastic sleeve)
2 conductors with same cross section, rigid
2 conductors with same cross section, flexible
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Maximum load current
41 A (with 10 mm² conductor cross-section)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Relative insulation material temperature index (Elec., UL 746 B)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26