Product type
Bolt connection terminal block
Maximum power dissipation for nominal condition
Number of connections per level
Tightening torque disconnect slide
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Connection in acc. with standard
DIN 46234:1980-03
DIN 46237:1970-07
IEC 60947-7-1
Maximum load current
50 A (with 10 mm² conductor cross-section)
Nominal voltage
800 V (with open 630 V disconnect point)
Cross section
0.1 mm² ... 10 mm²
0.5 mm² ... 6 mm²
Cross section range AWG
20 ... 10 (converted acc. to IEC)
26 ... 8 (converted acc. to IEC)
Identification color of ring cable lugs : red
Identification color of ring cable lugs : blue
Identification color of ring cable lugs : yellow
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
Relative insulation material temperature index (Elec., UL 746 B)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
Calorimetric heat release NFPA 130 (ASTM E 1354)
Surface flammability NFPA 130 (ASTM E 162)
Specific optical density of smoke NFPA 130 (ASTM E 662)
Smoke gas toxicity NFPA 130 (SMP 800C)
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time withstand current 10 mm²