Order information:
Fuse-link not supplied as standard
Maximum power dissipation for nominal condition
LED voltage range
110 V AC/DC ... 250 V AC/DC
Maximum power dissipation
max. 1.6 W (With interconnected arrangement of several fuse terminal blocks in the event of overload)
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
max. 2.5 W (With interconnected arrangement of several fuse terminal blocks in the event of a short-circuit)
max. 4 W (with single arrangement of the fuse terminal block in the event of a short-circuit)
Number of connections per level
Internal cylindrical gage
Connection in acc. with standard
IEC 60947-7-1
IEC 60947-7-3
Conductor cross-section rigid
0.2 mm² ... 6 mm²
0.5 mm² ... 6 mm²
Cross section AWG
24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible
0.2 mm² ... 4 mm²
0.2 mm² ... 6 mm²
Conductor cross-section, flexible [AWG]
24 ... 10 (converted acc. to IEC)
24 ... 12 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.25 mm² ... 4 mm²
0.5 mm² ... 4 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.25 mm² ... 4 mm²
0.5 mm² ... 4 mm²
Conductor cross-section flexible (2 conductors with the same cross-section, with TWIN ferrule and pl
Maximum load current
32 A (bei 6 mm² Leiterquerschnitt starr)
6.3 A (the current is determined by the fuse used)
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Conductor cross-section, rigid [AWG]
20 ... 10 (converted acc. to IEC)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
Relative insulation material temperature index (Elec., UL 746 B)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
Calorimetric heat release NFPA 130 (ASTM E 1354)