General
The max. load current must not be exceeded by the total current of all connected conductors.
Current and voltage are determined by the plug used.
Area of application
Machine building
Plant engineering
Railway industry
Maximum power dissipation for nominal condition
Number of connections per level
Connection method
Push-in / plug connection
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
0.14 mm² ... 1.5 mm²
0.25 mm² ... 1.5 mm²
Cross section AWG
26 ... 16 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
26 ... 16 (converted acc. to IEC)
Conductor cross-section flexible ultrasound-compressed
Conductor cross-section, flexible [AWG] ultrasound-compressed
22 ... 16 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.14 mm² ... 1.5 mm²
0.34 mm² ... 1.5 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Using the AI-S 1-8 TQ ferrule, Item No. 1200293, is recommended)
0.34 mm² ... 1 mm²
Nominal current
17.5 A (observe derating)
Maximum load current
17.5 A (with 1.5 mm² conductor cross-section)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
Relative insulation material temperature index (Elec., UL 746 B)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
Calorimetric heat release NFPA 130 (ASTM E 1354)
Surface flammability NFPA 130 (ASTM E 162)
Specific optical density of smoke NFPA 130 (ASTM E 662)
Smoke gas toxicity NFPA 130 (SMP 800C)