Note
When establishing a connection on the open housing side of a feed-through modular terminal block of the same series and size, the block must be provided with a cover if the expected insulation voltage is >320 V.
Area of application
Machine building
Plant engineering
Railway industry
Maximum power dissipation for nominal condition
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
0.2 mm² ... 6 mm²
0.5 mm² ... 6 mm²
Cross section AWG
24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.25 mm² ... 4 mm²
0.5 mm² ... 4 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.25 mm² ... 4 mm²
0.5 mm² ... 4 mm²
Conductor cross-section flexible (2 conductors with the same cross-section, with TWIN ferrule and pl
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Maximum load current
36 A (bei 6 mm² Leiterquerschnitt starr)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Relative insulation material temperature index (Elec., UL 746 B)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
Surface flammability NFPA 130 (ASTM E 162)
Specific optical density of smoke NFPA 130 (ASTM E 662)
Smoke gas toxicity NFPA 130 (SMP 800C)
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time withstand current 4 mm²