General
For use with PTPOWER 50, 95, 150, and 185 PowerTurn high-current terminal blocks
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Conductor cross-section flexible, with TWIN ferrule with plastic sleeve
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time withstand current 10 mm²
Maximum power dissipation for nominal condition
Number of connections per level
Conductor cross-section/weight
0.5 mm² / 0.3 kg
10 mm² / 2 kg
16 mm² / 2.9 kg
Internal cylindrical gage
Conductor cross-section rigid
0.5 mm² ... 16 mm²
1 mm² ... 16 mm²
Spectrum
Long life test category 1, class B, body mounted
Cross section AWG
20 ... 6 (converted acc. to IEC)
Frequency
f<sub>1</sub> = 5 Hz to f<sub>2</sub> = 150 Hz
Conductor cross-section flexible
0.5 mm² ... 10 mm²
0.5 mm² ... 16 mm²
Conductor cross-section, flexible [AWG]
20 ... 6 (converted acc. to IEC)
20 ... 8 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.5 mm² ... 10 mm²
4 mm² ... 10 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.5 mm² ... 10 mm²
2.5 mm² ... 10 mm²
Test directions
X-, Y- and Z-axis
X-, Y- and Z-axis (pos. and neg.)
Conductor cross-section flexible (2 conductors with the same cross-section, with TWIN ferrule and pl
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Number of shocks per direction
Maximum load current
50 A
57 A (The maximum load current must not be exceeded by the total current of all connected conductors.)
Nominal voltage
1000 V AC 1500 V DC
1500 V
Operating temperature range