Maximum power dissipation for nominal condition
Number of connections per level
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
0.14 mm² ... 2.5 mm²
0.34 mm² ... 2.5 mm²
Cross section AWG
26 ... 14 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
26 ... 16 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.14 mm² ... 1.5 mm²
0.34 mm² ... 1.5 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.14 mm² ... 1.5 mm²
0.34 mm² ... 1.5 mm²
Maximum load current
12 A (in case of a 2.5 mm² conductor cross-section, the maximum load current must not be exceeded by the total current of all connected conductors.)
24 A (in case of a 2.5 mm² conductor cross-section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Conductor cross-section, rigid [AWG]
20 ... 14 (converted acc. to IEC)
Color of connection elements
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
Relative insulation material temperature index (Elec., UL 746 B)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
Calorimetric heat release NFPA 130 (ASTM E 1354)
Surface flammability NFPA 130 (ASTM E 162)
Specific optical density of smoke NFPA 130 (ASTM E 662)
Smoke gas toxicity NFPA 130 (SMP 800C)
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time withstand current 1.5 mm²
Short-time withstand current 2.5 mm²