Inrush current integral (I2t)
< 0.4 A<sup>2</sup>s (typ.)
Nominal input voltage range
Nominal output current (IN)
1.25 A (-25 °C ... 55 °C)
Voltage type of supply voltage
Inrush current integral (I<sup>2</sup>t)
< 0.4 A<sup>2</sup>s (typ.)
Frequency range (f<sub>N</sub>)
Mains buffering time
> 115 ms (230 V AC)
> 25 ms (120 V AC)
Current consumption
typ. 0.4 A (240 V AC)
typ. 0.8 A (100 V AC)
Nominal power consumption
Protective circuit
Transient surge protection; Varistor
Input fuse
2 A (slow-blow, internal)
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Efficiency
typ. 87 % (120 V AC)
typ. 88 % (230 V AC)
Nominal output current (I<sub>N</sub>)
1.25 A (-25 °C ... 55 °C)
Derating
55 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Control deviation
< 0.1 % (change in input voltage ±10 %)
< 1 % (change in load, static 10 % ... 90 %)
< 2 % (Dynamic load change 10 % ... 90 %, 10 Hz)
Residual ripple
< 60 mV<sub>PP</sub> (with nominal values)
Maximum no-load power dissipation
Power loss nominal load max.
Rise time
< 0.5 s (U<sub>OUT</sub> (10 % ... 90 %))
Connection in parallel
yes, for redundancy and increased capacity
Conductor cross-section, rigid min.
Conductor cross-section, rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.
Conductor cross-section AWG min.
Conductor cross-section AWG max.