Nominal input voltage UIN
Test voltage: 5 V supply of the local bus (UBus) / 24 V supply (I/Os)
Test voltage: 5 V supply of the local bus (UBus) / functional ground
Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
Connection method
Bus base module
Push-in connection
Required configuration data
Input name
Counter inputs
Digital inputs
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Output description
Push-pull outputs, driver power = 500 mA against GND (high-side switch, PNP), reduced driver power = 100 mA against nominal voltage (low-side switch, NPN)
Protective circuit
Overload protection; electronic
Reverse polarity protection; electronic
Short-circuit protection; Electronic
Surge protection; electronic (35 V, 0.5 s)
Output current
max. 100 mA (Per channel, low side)
max. 500 mA (Per channel, high side)
Nominal load, ohmic
For applications with UL approval, only connect ohmic loads or general loads.
Mounting position
any (no temperature derating)
Scope of supply
including bus base module and Axioline F connectors
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Supply voltage
24 V DC
24 V DC (from U<sub>IO</sub>)
5 V DC (via bus base module)
Current draw
max. 100 mA
max. 4 A
typ. 90 mA
Supply voltage range
19.2 V DC ... 30 V DC
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption
typ. 33 mA (Own current consumption; without wiring of the terminal points)
Designation
Sensor supply (U<sub>S1</sub>, U<sub>S2</sub>)
Test voltage: 5 V supply of the local bus / 24 V supply (I/Os)
Test voltage: 5 V supply of the local bus (U<sub>Bus</sub>) / functional ground
Test voltage: 24 V supply (I/O) / functional ground