Note
2018
2019
The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area.
Standby power consumption PC
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Voltage protection level Up
Residual voltage Ures
≤ 1.9 kV (at 3 kA)
≤ 2.1 kV (at 5 kA)
≤ 2.2 kV (at 10 kA)
≤ 2.5 kV (at 15 kA)
≤ 2.7 kV (at 20 kA)
≤ 2.9 kV (at 30 kA)
≤ 3 kV (at 40 kA)
Maximum continuous operating voltage UCPV
Distance between live and grounded parts
Short-circuit current rating ISCPV
Open-circuit voltage UOCSTC
Continuous operating current ICPV
Installation location of the disconnect device
Nominal discharge current In (8/20) µs
20 kA (4x (5x I<sub>n</sub> | 120 s) | 30 min))
End-of-life mode
OCFM (Open-Circuit Failure Mode)
Nominal discharge current In
Surge protection fault message
Flammability rating according to UL 94
Direction of action
(L+)-PE & (L-)-PE & (L+)-(L-)
Standby power consumption P<sub>C</sub>
Nominal discharge current I<sub>n</sub> (8/20) µs
Maximum discharge current I<sub>max</sub> (8/20) µs
Voltage protection level U<sub>p</sub>
Residual voltage U<sub>res</sub>
≤ 1.9 kV (at 3 kA)
≤ 2.1 kV (at 5 kA)
≤ 2.2 kV (at 10 kA)
≤ 2.5 kV (at 15 kA)
≤ 2.7 kV (at 20 kA)
≤ 2.9 kV (at 30 kA)
≤ 3 kV (at 40 kA)
Response time t<sub>A</sub>
Maximum continuous operating voltage U<sub>CPV</sub>
Short-circuit current rating I<sub>SCPV</sub>
Open-circuit voltage U<sub>OCSTC</sub>
Continuous operating current I<sub>CPV</sub>
Nominal discharge current I<sub>n</sub> (8/20) µs
20 kA (4x (5x I<sub>n</sub> | 120 s) | 30 min))