Inrush current integral (I2t)
Nominal input voltage range
Input voltage range
600 V DC ... 1500 V DC -15 % ... +10 %
Setting range of the output voltage (USet)
Nominal output current (IN)
Input voltage range DC
600 V DC ... 1500 V DC -15 % ... +10 %
Typical national grid voltage
Voltage type of supply voltage
Inrush current integral (I<sup>2</sup>t)
Current consumption
typ. 0.145 A (1500 V DC)
typ. 0.35 A (600 V DC)
Recommended breaker for input protection
Recommended fuse for input protection
Efficiency
typ. 89 % (1500 V DC)
typ. 90.9 % (900 V DC)
typ. 91.5 % (600 V DC)
Setting range of the output voltage (U<sub>Set</sub>)
Nominal output current (I<sub>N</sub>)
Derating
> 60 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Control deviation
< 0.1 % (change in input voltage ±10 %)
< 1 % (change in load, static 10 % ... 90 %)
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
Residual ripple
< 40 mV<sub>PP</sub> (Ripple)
< 50 mV<sub>PP</sub> (Noise)
Maximum no-load power dissipation
Power loss nominal load max.
Rise time
≤ 30 ms (U<sub>OUT</sub> (10 % ... 90 %))
Connection in parallel
yes, for redundancy and increased capacity
Fuse protection (secondary side)
Conductor cross-section, rigid min.
Conductor cross-section, rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.
Conductor cross-section AWG min.
Conductor cross-section AWG max.
Types of signaling
Floating signal contact
LED
Signalization designation