Notes on operation
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
The outputs are not suitable for switching different outer conductors.
The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
Test voltage relay winding/relay contact
2.5 kV<sub>rms</sub> (50 Hz, 1 min.)
Nominal input voltage U<sub>N</sub>
Conductor cross-section rigid
Conductor cross-section flexible
0.2 mm² ... 1.5 mm² (with ferrule)
0.2 mm² ... 2.5 mm² (without ferrule)
Conductor cross-section AWG
Depth (Retaining bracket)
84 mm (with retaining bracket)
Color
traffic gray B (RAL 7043)
Degree of protection (Installation location)
≥ IP54 (Installation location)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Assembly note
in rows with zero spacing