Assembly note
<b>NOTE:</b> Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Max. operating voltage Umax
Note on application
Cables with 5 conductors may have a maximum connection cross-section of 0.5 mm²/20 AWG.
Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories".
Monitored function
Supply voltage per module
Max. operating voltage U<sub>max</sub>
Local diagnostics
Status display I/O Yellow LED
Supply voltage per module Green LED
Nominal voltage U<sub>N</sub>
Max. current carrying capacity per path
Current carrying capacity per slot
Sensor/actuator connection system
Conductor cross-section Flexible signal line
Conductor cross-section Flexible power supply
Connection cross section AWG Flexible signal line
Connection cross section AWG Flexible power supply
Stripping length Signal line
Stripping length of the sheath
Tightening torque, cover screw
Tightening torque of mounting screw for fixing the housing
Tightening torque, union nut
Slot/position = Wire color or connection
1 / 2 (B) = 1 / 2
1 / 4 (A) = 1 / 4
1-4 / 1 (+ 24 V) = U<sub>N</sub>
1-4 / 3 (0 V) = 0 V
1-4 / 5 (PE) = PE
2 / 2 (B) = 2 / 2
2 / 4 (A) = 2 / 4
3 / 2 (B) = 3 / 2
3 / 4 (A) = 3 / 4
4 / 2 (B) = 4 / 2
4 / 4 (A) = 4 / 4
Material Molding compound
Flammability rating according to UL 94
Material of contact, master cable side
Material of the contact carrier on the master cable side
Material of contact surface, master cable side
Connection method
Pluggable screw connection
Ambient temperature (operation)
-30 °C ... 80 °C
-5 °C ... 50 °C (During assembly)