Max. internal inductance Li
Note on application
The input variables can be set via the ISpac Wizard parameterization software or DIP switches.
Max. internal capacitance Ci
Notes on operation
2-conductor comparison set via DIP switch ADJ
Output behavior = 2.4 mA (0 mA ... 23 mA or “Hold last value” can be configured)
Sensor set via software or DIP switches
Max. output power Po
32 mW (linear characteristic curve)
Safety-related maximum voltage Um
IIA (simple circuit): Max. external inductivity Lo / Max. external capacitance Co
Electrical isolation between input and output
IIB (simple circuit): Max. external inductivity Lo / Max. external capacitance Co
IIC (simple circuit): Max. external inductivity Lo / Max. external capacitance Co
Temperature coefficient, typical
I (simple circuit): Max. external inductivity Lo / Max. external capacitance Co
Reverse polarity protection
Description of the input
Potentiometer
Resistance thermometer
Thermocouple
Sensor types (RTD) that can be used
Pt 100, Pt 250, Pt 500, Pt 1000, Pt 2000, Ni 100, Ni 500, Ni 1000, M50, M53, M100
Temperature measuring range
-200 °C ... 1100 °C (Range depending on the sensor type)
-200 °C ... 1800 °C (Range depending on the sensor type)
≥ 36 K (Range depending on the sensor type)
≥ 51 K (Range depending on the sensor type)
Connection technology
2-, 3-, 4-conductor
3-conductor
Max. permissible overall conductor resistance
≤ 1000 Ω (per wire)
100 Ω (per wire, 3-, 4-conductor circuit)
50 Ω (per wire, 2-conductor circuit)
Sensor types that can be used (TC)
B, E, J, K, N, R, S, T, L, U, XK
Linear resistance measuring range
0.5 kΩ ... 5 kΩ
1 kΩ ... 10 kΩ
10 kΩ ... 100 kΩ (with parallel 10 kΩ shunt, no wire-break monitoring)
50 Ω ... 500 Ω
Maximum switching voltage
Current output signal
0 mA ... 20 mA (configurable)
0 mA ... 21 mA (Function area)
4 mA ... 20 mA (configurable)
Load
0 Ω ... 600 Ω (per channel)
Connection method
4-pos. socket
Screw connection
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Max. internal inductance L<sub>i</sub>
Max. internal capacitance C<sub>i</sub>
Max. output voltage U<sub>o</sub>