Nominal input voltage UIN
Nominal input current at UIN
Test voltage: 24 V supply (logic and sensor supply US) / functional ground
Test voltage: 24 V supply (actuator supply UA) / 24 V supply (logic and sensor supply US)
Test voltage: 24 V supply (actuator supply UA) / functional ground
Volume concentration H2S (Hydrogen sulfide)
Volume concentration NO2 (Nitrogen dioxide)
Connection method
M12 connector
M12 connector, A-coded
M12 connector, D-coded
M12 connector, L-coded
Volume concentration Cl2 (Chlorine)
Note on the connection method
Push-pull fast connection according to IEC 61076-2-010 or screw connection according to IEC 61076-2-101
Screw connection in accordance with IEC 61076-2-111
Volume concentration SO2 (Sulfur dioxide)
Transmission speed
100 Mbps (with auto negotiation)
System-specific protocols
PROFINET protocols DCE/RPC
PROFINET protocols DCP
PROFINET protocols LLDP
PROFINET protocols MRP client
Supported functions
FSU < 600 ms
I&M functions
Description of the input
IEC 61131-2 types 1 and 3
Cable length
max. 30 m (to the sensor)
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Sensor current per channel
max. 2 A (from U<sub>S</sub>)
Input filter time
< 100 µs (Filter disabled)
1000 µs (Default)
3000 µs
Protective circuit
Overload protection; yes
Reverse polarity protection; yes
Short-circuit protection; yes
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Designation
Supply of actuators (U<sub>A</sub>) for additional devices
Supply of the logic and sensors (U<sub>S</sub>)
Supply voltage
24 V DC
24 V DC (Nominal voltage)
Supply voltage range
18 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption
max. 16 A
typ. 4 mA
typ. 65 mA