Assembly note
<b>NOTE:</b> Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Max. operating voltage Umax
Note on application
Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories".
Max. operating voltage U<sub>max</sub>
Operating current of the indicator elements
Nominal voltage U<sub>N</sub>
Rated current, total
10 A
2x 8 A (For electrical isolation)
Max. current carrying capacity per path
Current carrying capacity per slot
Sensor/actuator connection system
Tightening torque slot sensor/actuator cable
Tightening torque of mounting screw for fixing the housing
Slot/position = Wire color or connection
1 / 4 (A) = 1 / 4
1-4 / 1 (+ 24 V) = U<sub>N</sub>
1-4 / 3 (0 V) = 0 V
1-4 / 5 (PE) = PE
2 / 4 (A) = 2 / 4
3 / 4 (A) = 3 / 4
4 / 4 (A) = 4 / 4
Material Molding compound
Flammability rating according to UL 94
Material of contact, master cable side
Material of the contact carrier on the master cable side
Material of contact surface, master cable side
Connection method
Pluggable screw connection
Ambient temperature (operation)