Note
2018
2019
Depending on the installation height, additional minimum lateral distances to grounded, conductive surfaces may need to be observed. See the table in the download area under the item Packing slip in the installation notes.
Protective conductor current IPE
Standby power consumption PC
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Total discharge current ITotal (8/20) µs
Voltage protection level Up
Residual voltage Ures
≤ 4.5 kV (at 3 kA)
≤ 4.8 kV (at 5 kA)
≤ 5 kV (at 10 kA)
≤ 5.7 kV (at I<sub>n</sub>)
Type
DIN rail module, two-section, divisible
Maximum continuous operating voltage UCPV
Installation location of the disconnect device
Short-circuit current rating ISCPV
Open-circuit voltage UOCSTC
Insulation resistance Riso
Continuous operating current ICPV
End-of-life mode
OCFM (Open-Circuit Failure Mode)
Surge protection fault message
Conductor cross-section flexible
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section rigid
1.5 mm² ... 25 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section AWG
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section, flexible, with ferrule, without plastic sleeve
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Depth
71.5 mm (incl. DIN rail 7.5 mm)
Color
gray (RAL 7042)
light gray (RAL 7035)
Flammability rating according to UL 94