Protective conductor current IPE
Standby power consumption PC
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Impulse discharge current (10/350) µs, peak value limp
Type
DIN rail module, two-section, divisible
Total discharge current ITotal (8/20) µs
Total discharge current ITotal (10/350) µs
Installation location of the disconnect device
Voltage protection level Up
Residual voltage Ures
≤ 3 kV (at 3 kA)
≤ 3.2 kV (at 5 kA)
≤ 3.6 kV (at 10 kA)
≤ 4.2 kV (at I<sub>n</sub>)
End-of-life mode
OCFM (Open-Circuit Failure Mode)
Maximum continuous operating voltage UCPV
Short-circuit current rating ISCPV
Surge protection fault message
Open-circuit voltage UOCSTC
Insulation resistance Riso
Continuous operating current ICPV
Conductor cross-section flexible
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section rigid
1.5 mm² ... 25 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section AWG
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Conductor cross-section, flexible, with ferrule, without plastic sleeve
1.5 mm² ... 16 mm²
2x 1.5 mm² ... 6 mm² (2 conductors with the same cross-section)
Depth
71.5 mm (incl. DIN rail 7.5 mm)
Color
gray (RAL 7042)
light gray (RAL 7035)
Flammability rating according to UL 94