General
<b>NOTE:</b> Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Nominal voltage UN
450 V AC/DC (flexible installation)
500 V AC/DC (Fixed, protected installation)
Product type
Assembled installation cable
Nominal current IN
16 A (in accordance with IEC 61984)
Order information:
This item is also available with other cable lengths. For your specific requirements, please contact your local PHOENIX CONTACT subsidiary.
Number of connections per position
Rated surge voltage (III/3)
Rated current
16 A (in accordance with IEC 61984)
Rated voltage (III/3)
450 V (flexible installation)
500 V (Fixed, protected installation)
Nominal voltage U<sub>N</sub>
450 V AC/DC (flexible installation)
500 V AC/DC (Fixed, protected installation)
Nominal current I<sub>N</sub>
16 A (in accordance with IEC 61984)
Connection method On the field side
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter
Class 5 in accordance with IEC 60228
Single wire, color
brown L, blue N, green-yellow PE
Minimum bending radius, fixed installation
Minimum bending radius, flexible installation
Ambient temperature (operation)
-30 °C ... 100 °C (Plug)
-30 °C ... 80 °C (cable, fixed installation)
-5 °C ... 70 °C (Cable, flexible installation)
Insertion/withdrawal cycles
100 (IP66)
50 (IP66/IP68/IP69K)
Degree of protection
IP66
IP68 (2 m / 24 h)
IP69K (Distance from the nozzle 150 mm)
Touch-proof when not plugged in (IP2X)
Ambient temperature (operation) (Cable, flexible installation)
-5 °C ... 70 °C (Cable, flexible installation)
Ambient temperature (operation) (Cable, fixed installation)
-30 °C ... 80 °C (cable, fixed installation)
Temperature when conductor connected
Resistance to UV radiation