MTTF
184 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
78 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
1:1 Network Address Translation (NAT) in the VPN
Filtering
IP addresses
Ports
Protocols
Firewall rules
Stateful inspection firewall
Internet Protocol Security (IPsec) mode
Encryption methods
3DES, AES-128, -192, -256
Electrical isolation
VCC // LTE // Ethernet // PE
Maximum power dissipation for nominal condition
Supply voltage range
10 V DC ... 30 V DC (Via pluggable Push-in terminal block)
Typical current consumption
< 200 mA (24 V DC)
65 mA (With activated energy-saving mode)
Management
Web-based management, SNMP
Switching level "1" signal
Voltage output signal
10 V DC ... 30 V DC (depending on the operating voltage)
Current output signal
≤ 50 mA (Not short-circuit proof)
Connection method
Push-in spring connection
RJ45 jack, shielded
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
Single conductor/terminal point, rigid
Single-wire/terminal point, flexible
Conductor cross-section, flexible [AWG]
Signal
± 1 kV (Data line, asymmetrical)
± 2 kV (Ethernet)
Ethernet
Serial transmission speed
10/100 Mbps, auto negotiation
Transmission length
100 m (shielded twisted pair)
Protocols supported
TCP/IP, UDP/IP, FTP, HTTP(S)
Auxiliary protocols
ARP, DHCP, PING (ICMP), SNMP V1/V2, SMTP(S), NTP, SSL/TLS, STARTTLS
Interface description
GSM / GPRS / EDGE / UMTS / HSPA+ / LTE
Frequency range
0.15 MHz ... 80 MHz
1800 MHz (1 W (EGSM))
1800 MHz (LTE B3)
2100 MHz (LTE B1)
2100 MHz (UMTS/HSPA B1)
2300 MHz (LTE B40)
2500 MHz (LTE B41)
2600 MHz (LTE B38)
2600 MHz (LTE B7)
700 MHz (LTE B28A)
80 MHz ... 3 GHz (Test Level 3)
800 MHz (LTE B20)
900 MHz (2 W (EGSM))
900 MHz (LTE B8)
900 MHz (UMTS/HSPA B8)
Data rate
≤ 150 Mbps (LTE, DL)
≤ 50 Mbps (LTE, UL)
Antenna
50 Ω impedance SMA antenna socket
Antenna connection method