CCCex note
Use in potentially explosive areas is not permitted in China.
Flammability rating according to UL 94
Basic functions
PSE/Midspan, compliant with IEEE 802.3af, at
Serial transmission speed
Frequency range
0.15 MHz ... 80 MHz
125 MHz
80 MHz ... 3 GHz (Test Level 3)
Connection method
IDC connection
Push-in connection
RJ45 jack
Note on the connection method
Transmission length
100 m (including patch cables)
Single conductor/terminal point, rigid
0.14 mm² ... 0.34 mm²
0.2 mm² ... 2.5 mm²
Single-wire/terminal point, flexible
0.14 mm² ... 0.34 mm²
0.2 mm² ... 2.5 mm²
Max. AWG conductor cross-section, flexible
Min. AWG conductor cross-section, flexible
Single-wire/terminal point, rigid AWG max.
Single-wire/terminal point, rigid AWG min.
Wire diameter incl. insulation
1.6 mm (Terminal block is tested with PVC insulation - other insulation materials available on request)
Frequency of connections between conductors of the same cross section
MTTF
1510 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
256 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
661 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
Maximum power dissipation for nominal condition
5 W (24 V DC ... 48 V DC)
7 W (at 18 V DC)
Test voltage data interface/power supply
1.5 kV AC (50 Hz, 1 min.)
Nominal supply voltage
24 V DC (SELV/PELV, restrictions for ATEX applications)
48 V DC
Max. current consumption
0.7 A (48 V DC, Ex areas in accordance with UL-HazLoc)
1.4 A (24 V DC, Ex areas in accordance with UL-HazLoc)
2.1 A
Power consumption
≤ 40 W
270 mW (Shield current monitoring)
Protective circuit
Reverse polarity protection
Designation
Shield current monitoring
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
Conductor cross-section, flexible [AWG]
Degree of protection
IP20 (Manufacturer's declaration)