CCCex note
Use in potentially explosive areas is not permitted in China.
MTTF
118 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
287 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
654 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
MTBF
220 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
44 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
Maximum power dissipation for nominal condition
Test voltage data interface/power supply
1.5 kV<sub>rms</sub> (50 Hz, 1 min.)
Supply voltage range
18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
Typical current consumption
Max. current consumption
≤ 2 A (For operation in a joining station, via the DIN rail connector)
130 mA
Maximum switching voltage
30 V AC (Resistive load)
42 V AC (peak, resistive load)
60 V DC (Resistive Load, General Load)
Limiting continuous current
Connection method
COMBICON plug-in screw terminal block
F-SMA
Pluggable screw connection
Single conductor/terminal point, rigid
Single-wire/terminal point, flexible
Conductor cross-section, flexible [AWG]
Signal
± 1 kV
± 2 kV
DATA HIGHWAY
J-BUS
Modbus
S-BUS
Suconet K
Transmit capacity, minimum
-16 dBm (200/230 µm)
-5.3 dBm (980/1000 µm)
Transmission length incl. 3 dB system reserve
100 m (F-P 980/1000 230 dB/km with quick mounting connector)
800 m (F-K 200/230 10 dB/km with quick mounting connector)
Transmission protocol
Protocol-transparent to the RS-485 interface
Minimum receiver sensitivity
Maximum receiver sensitivity
Transmission medium
Copper
PCF fiber
Polymer fiber
Serial transmission speed
4.8/ 9.6/ 19.2/ 38.4/ 57.6/ 75/ 93.75/ 115.2/ 136/ 187.5/ 375/ 500 kbps
Termination resistor
220 Ω
390 Ω
390 Ω (Can be connected)
File format/coding
UART (11/10 bit switchable; NRZ), slip-tolerant
Fiber types
200/230 µm
980/1000 µm
PCF fiber
Polymer fiber
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6
Operation: 5g, 10...150 Hz, 2.5 h, in XYZ direction
Shock in accordance with EN 60068-2-27/IEC 60068-2-27
Operation: 15g, 11 ms period, half-sine shock pulse