Control input (configurable) Rem
Output power ON/OFF (SLEEP MODE)
Inrush current integral (I2t)
Default
24 V DC 20 mA 24 V DC for P<sub>Out</sub> < P<sub>N</sub>
24 V DC 20 mA 24 V DC for U<sub>Out</sub> > 0.9 x U<sub>Set</sub>
closed (U<sub>out</sub> > 0.9 U<sub>Set</sub>)
Output power ON (>40 kΩ/24 V DC/open bridge between Rem and SGnd)
Frequency range (fN)
16.7 Hz (acc. to EN 50163)
50 Hz ... 60 Hz -10 % ... +10 %
Setting range of the output voltage (USet)
24 V DC ... 29.5 V DC (constant capacity)
Supply system configuration
Nominal input voltage range
100 V AC ... 240 V AC
110 V DC ... 250 V DC
Nominal output current (IN)
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
110 V DC ... 250 V DC -18 % ... +40 %
Static Boost (IStat.Boost)
Derating
< 100 V AC (1 %/V)
< 110 V DC (1 %/V)
> 60 °C ... 70 °C (2.5 %/K)
Dynamic Boost (IDyn.Boost)
Selective Fuse Breaking (ISFB)
POut
> 50 % (LED lights up green, output power > 60 W)
> 75 % (LED lights up green, output power > 90 W)
Typical national grid voltage
UOut
< 0.9 x U<sub>Set</sub> (LED flashes green)
> 0.9 x U<sub>Set</sub> (LED lights up green)
Voltage type of supply voltage
Inrush current integral (I<sup>2</sup>t)
Inrush current limitation
AC frequency range
50 Hz ... 60 Hz -10 % ... +10 %
Frequency range (f<sub>N</sub>)
16.7 Hz (acc. to EN 50163)
50 Hz ... 60 Hz -10 % ... +10 %
Mains buffering time
typ. 28 ms (120 V AC)
typ. 38 ms (230 V AC)
Current consumption
0.7 A (250 V DC)
0.8 A (240 V AC)
0.9 A (230 V AC)
1.5 A (120 V AC)
1.6 A (110 V DC)
1.7 A (100 V AC)
Nominal power consumption
Protective circuit
Transient surge protection; Varistor, gas-filled surge arrester
Input fuse
6.3 A (slow-blow, internal)
Recommended breaker for input protection
6 A ... 16 A (Characteristic B, C, D, K or comparable)
Discharge current to PE
< 3.5 mA
1.1 mA (264 V AC, 60 Hz)
Efficiency
typ. 88.8 % (120 V AC)
typ. 89.2 % (230 V AC)
Output characteristic
FUSE MODE
Smart HICCUP
U/I Advanced
Setting range of the output voltage (U<sub>Set</sub>)
24 V DC ... 29.5 V DC (constant capacity)
Nominal output current (I<sub>N</sub>)
Dynamic Boost (I<sub>Dyn.Boost</sub>)
Selective Fuse Breaking (I<sub>SFB</sub>)
Magnetic circuit breaker tripping
A1 ... A4 / B2 / C1 ... C2 / Z1 ... Z4
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Control deviation
< 0.25 % (change in input voltage ±10 %)
< 0.5 % (Static load change 10 % ... 90 %)
< 4 % (Dynamic load change 10 % ... 90 %, (10 Hz))
Residual ripple
< 30 mV<sub>PP</sub> (with nominal values)
Apparent power
180 VA (120 V, U<sub>OUT</sub> = 24 V, I<sub>OUT</sub> = stat. Boost)
198 VA (230 V, U<sub>OUT</sub> = 24 V, I<sub>OUT</sub> = stat. Boost)