Nominal input voltage UIN
Nominal input current at UIN
max. 4.3 mA (with 30.2 V DC)
typ. 3.7 mA (at 24 V DC)
Note on dimensions
Specifications including fixing clips and connectors
Housing material
Plastic POCAN B4239 GF30 YE 1018
Number of inputs
4 (for 2-channel assignment)
8 (for 1-channel assignment)
Connection method
M12 connector
M12 connector, A-coded
M12 connector, L-coded
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
max. 4.3 mA (with 30.2 V DC)
typ. 3.7 mA (at 24 V DC)
Input filter time
1.5 ms
15 ms
3 ms (Default)
5 ms
Protective circuit
Overload protection, short-circuit protection of sensor supply
Reverse polarity protection
Reverse polarity protection
Amount of process data
64 bit (Input and output data)
Number of outputs
4 (for 1-channel assignment, + switching)
4 (for 2-channel assignment, +/- switching)
Output current
max. 2 A (per channel)
max. 2 A (per output)
max. 6 A (Total current of all outputs; Please observe the notes in the user manual.)
Maximum output current per channel
Nominal output voltage
24 V DC (from voltage U<sub>A</sub>)
Load min.
2.4 kΩ (10 mA at 24 V DC)
Output voltage when switched off
< 5 V ((in the Low state))
Output current when switched off
2 mA (Leakage current in the Low state)
Delay time
max. 128 s (can be parameterized)
Reverse voltage resistance to short pulses
Operating mode
Process data mode with 4 words
Designation
Actuator supply (U<sub>A</sub>)
IO-Link port supply (L+)
Supply of module electronics and sensors (U<sub>S</sub>)